Dubbed as the Pocket CA, this handy 21g (3/4oz) tube of Insta-Cure+ Gap Filling CA has all the great properties of it’s larger Insta-Cure+ brothers but with a cleverly designed top that makes it ideal for use whilst in the field. The top incorporates an internal pin so that when screwed in place, the bottle is sealed which helps prevent accidental spillage whilst in transit.
Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out.